The Best Refrigerator Line 20 Feet

Product Description

The Eastman 48392 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 25-feet long. It is an ideal ice maker connector for use, featuring a grade 304 stainless steel braided exterior, plc. core, multi-filament braided nylon reinforcement, and a clear vinyl outer shell. For secure fitting, it comes with nickel-plated brass nuts.

Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.

From the Manufacturer

Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.

Product Description

Compression x compression x length, stainless steel ice maker connector. Use to connect most refrigerator ice maker in-line filters.

From the Manufacturer

LASCO 10-0958 Braided Stainless Steel Icemaker Supply Line, 1/4-Inch Compression x 1/4-Inch Compression x 20-Foot Long. Braided stainless steel icemaker supply line. 1/4-inch female compression x 1/4-inch female compression x 20-foot. Connect from 1/4-inch compression outlet stop. Connect to inline filter or refrigerator icemaker. Lead free product, meets California AB-1953, Vermont, and new federal standards for low lead applications. LASCO, Lasco Supply Company Inc, The Preferred Brand! Service, Selection, and Support!  Larsen Supply Company is 3rd Generation, Family owned and operated for over 80 years.  LASCO packaging includes helpful how to instructions and related project item information.  LASCO has the largest retail plumbing line in the industry today with over 7000 packaged and 16,000 bulk SKU’s. Visit our online web site catalog for one of the most complete product listing in the industry.

Product Description

Are you replacing a 5+ year-old ice maker connector hose or hooking up a new ice maker? This 15 ft. Braided Stainless Steel Ice Maker Connector from Certified Appliance Accessories is just what you need. It is corrosion-resistant inside and out plus bends freely for easier installation in cramped spaces.

From the Manufacturer

Ice Maker Connectors (15-Foot)

One 25FT Ice Maker hose with standard 1/4″comp x 1/4″ comp connectors. Key Features:

• Two layers PVC core with reinforced nylon wires in between and 304 stainless steel braided outer cover for high performace and durable water supply applications
• 1/4″ comp x 1/4″ comp connectors fits most of the Ice Makers
• Comply with following standards: ASME A112.18.6-2017/CSA B125.6-17, NSF/ANSI 61,372
• While typical water supply pressure ranges 50 – 80psi, our hoses are rated 290psi with burst strengh up to 1500psi.
• Working temperature ranges -40 to 210F
• Come with 10-year warranty for added peace of mind

This is an Everflow Supplies lead free flexible ice maker supply line, made of stainless steel braided tube. In particular, it has a length of 60 inch and it has two 1/4 inch compression fittings on both ends. Furthermore, upc, nsf and csa approved the part for meeting the lead free nsf 61-g standards.

The iSpring fridge connection kit connects your reverse osmosis system or other water filters to your fridge. It can be used to supply your refrigerator’s ice maker or water dispenser, your coffee maker, etc. The kit comes with a 1/4″ x 1/4″ x 1/4″ “T” valve to branch off from the RO system, 20 feet of 1/4″ tubing, a 1/4″ x 1/4″ ball valve to shut off the flow when needed, and a compression connection set for connecting to the output location. The fridge connection kit will work with any RO system or filtration system that uses standard 1/4″ tubing. Why iSpring? Located in Alpharetta, Georgia for over a decade, iSpring Water Systems LLC is a family owned company specializing in reverse osmosis water filtration systems. Our products include residential and commercial reverse osmosis (RO) systems, whole house water systems, ultrafiltration systems, shower, faucet, and counter top filters, filter cartridges and housings, RO coolers, and kitchen faucets and fittings. Our aim is to make high quality drinking water accessible for all households. With affordable pricing, solid quality, prompt delivery, and top notch customer service, we hope to assist in bringing you great water for years to come.

For years, licensed plumbers, electricians and appliance installers have relied on Certified Appliance Accessories for their power cords, hoses and connectors. Now you can too. Enjoy the convenience offered by this ice maker connector from Certified Appliance Accessories. Its flexibility and durability ensure a reliable connection for your next home installation project. This hose has been thoroughly tested and is backed by a 5-year limited warranty. Check your appliance’s manual for the correct specifications to ensure this is the right connector hose for you. Thank you for choosing Certified Appliance Accessories—Your Appliance Connection Solution.