The Best Phantom 3 Extended Range Antenna

BlueProton DJI Phantom 3 Standard WiFi Signal Range Extender Antenna Kit.
(6)-Antenna Kit: (2)+(2) customized high-gain 2.4GHz-2.591GHz 7dBi Panels & Omnis, (1) 10dBi 5.8GHz omni antenna, (1) 6dBi 5.8GHZ panel antenna with stand and installation hardware. Full
Lightweight, durable, pratical and convenient to use in compact design. Full range coverage, strong and stable signal improves both remote control and Wifi video connection performance.

Our antenna kits will extend the range up to 4 times the DJI rating and help with the signal penetration around objects. Increases range from approx. 300m to up to 1200m. Actual range extension will depend on your exact deployment environment, and is not guaranteed.

Installation is relatively simple with guided YouTube video.

This item is for the DJI Phantom 3 Standard only.

Description:
Compatible for DJI Phantom 4, Phantom 3 Proffesional/Advanced, Inspire 1/2
controller transmitter. (No compatiable for Phantom 3 Standar, Phantom 2).

Copper Parabolic Technology:
Foil Aluminium using. prevent oxidation. Accurate
parabolic curved booster completely reflects the remote signal to the antenna (focal
point of reflector)

Parabolic reflector;
Foldable; Slide on and off. No tools or modifications
required. No bump or deformation on the reflecting panel!

It Significantly Increase Your both remote control and Wi-Fi video connection
performance for DJI Phantom 4 Phantom 3 Pro / Advanced / Inspire 1, In an open
area, The actual measurement distance greater than 2.8KM.

Package included:
Signal Booster x 1(DJI controller, mobile device holder and
tablet are NOT included)

Replacing your WiFi antenna with This Alfa Antenna will significantly increase the range and strength of your WiFi signal. Our quality panel antenna is a direct replacement for the antenna that comes standard with your router, access point, VOIP device, or PCI card. it can send and receive WiFi in all directions. Installation is very easy – just twist off the factory antenna and twist on our Booster Antenna and you’ll experience an instant jump in.

PLEASE NOTE THAT THE INCREASE IN SIGNAL STRENGTH DEPENDS MOSTLY ON YOUR ROUTER OR ADAPTER THIS HELPS TO BUT IT CANNOT TRANSMIT OR RECEIVE POWER THAT YOUR MODEM OR ADAPTER DOES NOT HAVE!!! IT JUST GIVES MORE RANGE NOT STRONGER POWER!

Works With all of the Models Below and With many other routers as well

Linksys

WET54G, WET54GS, WMP54G, WMP54GS, WET11, WRV54G, WMP11 PCI Card, WPS11, WRT54GC, WRT54GL
Netgear

R6700-100NAS, R6220-100NAS, FM114P, FVM318, FWG114P, MA311, ME101, ME103, WG302, WG311, WG311T,
D-Link

DIR-880L, DIR-842, DIR-605L, DIR-825, DAP-1360, DI-514, DI-524, DI-614, DI-624, DI-624S, DI-624M, DI-711, DI-713P, DI-714, DI-714P, DI-724U, DI-764, DI-774, DI-824VUP, DP-311P, DP-311U, DP-313, DP-G321, DP-G310, DPG-2000W, DSL-G604T, DSM-604H, DSM-622H, DSM-624H, DWL-1000AP, DWL-1700AP, DWL-1750,
Alfa

AWUS036H, AWUS036H1W, APA05, AWUS036NH, AWUS036NEH, AWUS048NH, AWUS036EW, AWUS051NH, AWUS036AC, AWUS036EAC, AWUS036ACH, AWUS052NH, AWUS052NHS, AWUS1900, U24
ASUS

RT-AC3200, Wireless-AC3200, Asus RT-N12 D1, RT-AC68U, RT-N66U, RT-N12

TRENDnet
TEW-731BR

TP-Link
Archer C7, AC1900, AC3150

Stay inside your car or house amd fly your Phantom 3 Standard from the comfort of the indoors! This Car kit accessories is For DJI Phantom 3 Standard/SE ARGtek Extender Kit 1 x Suction Cup 1 x Antenna Mount 1 x 1.5M RG316 Extended Cable Car kit The best way to use DJI Intelligent modes with the remote indoor, antenna kit put outdoor, use Omni-Directional Antenna Lightweight, durable, practical and convenient to use in compact design. This package is for the people who have the ARGtek Extender Kit. EXT1 Please make sure you have already installed the ARGtek antennas kit for P3 Standard before you purchase the car kit. The car kit does not include the antennas and remote control mount.

TECHTOO 7dBi 2.4GHz/5.8GHz Omni Antenna with RP-SMA Connector Can Increase The Range of Your Wireless Router/Access Point or Client.
Off the shelf equipment typically has a 2.0 dBi antenna. This antenna will increase your signal strength and therefore range.

The Rugged Polycarbonate Body Makes Them Suitable For Use In a Wide Variety Of Applications, Including Office LAN Environments Factory Floors, Remote Telemetry And Other Environments.

The RP-SMA Connector Has Threads on The Inside And a Center Socket. The Tilt And Swivel Feature Allows The Antenna To Be Positioned At Practically Any Angle.
This Screw-on, Swivel Mount RP-SMA FEMALE Connector Is Compatible With Many Wireless Communications Systems Including: Dlink, GRE America, Linksys WET11, Maxtech, Netgear, Proxim, Siemens, SmartBridges, Waveaccess, Zcom, Netgate Wireless-Redy M1n1wall, RouterStation PRO Products And All USB Adapters With Screw on/off Antennas Such As The ALFA And EnGenius USB products.
*Note: Change ALL the Antennas into NEW TECHTOO 7dBi Duan Band Antennas, If your old Device Have More Than One Antennas.

Increases the Range of Your Wireless Device Such as Router, Access Point, Mini PCIe Network Card, Wireless Wan Range Extender
Simply Replace Current Antenna to Increase Signal Strength, Extend Wireless Range to Dead Spot

2x 7dBi RP-SMA Antenna for Both 2.4GHz and 5.8GHz 802.11 B/G/N/AC Frequency
Nickel Plated RP-SMA Connector(Screw-On Swivel)
Legal Statement: Copyright2016 by TECHTOO Inc. All rights reserved.
No part of the description above may be reproduced, distributed, or transmitted in any form or by any means, including relisting to Amazon or any online marketplace, photocopying, recording, or other electronic or mechanical methods, without the prior written permission of TECHTOO Inc. For permission requests, write to the seller ID below:
Amazon Seller ID: A3FOIJMNOEIRMM

This Wi-Fi Dual Band Omni-Directional long range antennas will significantly increase the range and strength of your Wi-Fi signal. Our quality built Omni-Directional Dual Band antennas are a direct replacement for the antennas that comes standard with routers, access points, VOIP devices. Each Dual Band antenna is Omni directional, no aiming is required – it can send and receive Wi-Fi in all directions. Installation is very easy – just twist off the factory antennas and twist on our Antennas.
Wi-Fi Antennas will WORK WITH ANY ROUTER or Network Device with RP-SMA Female Connector. The KIT no soldering for Wireless Routers Linksys Cisco, E2000 E2500 EA2700 E3000 EA3500 E4200 EA4500 EA6200 WRT310N WRT320N WRT330N WRT400N WRT610N WRT54GS2 Belkin F7D8301 Netgear N600 N750 N900 WN2500RP WNDR3300 WNDR3400 WNDR3700 v.2v.3 WNDR3800 WNDR4000 WNDR4500 WNR834B v.1v.2 WNR2000 WNR2200 DGND3700 v.1v.2 D-Link DIR-655 Buffalo WZR-HP-G450H Mini PCIe Cards Network Extension Bulkhead Pigtail PCI Wi-Fi WAN Repeater. Use for mini PCI-E interface, do not use for M.2(NGFF) interface. Please check and confirm your cards interface before purchase.

PRODUCT SPECIFICATIONS:
– Product name/No.: 2.4GHz/5GHz Dual Band Omni-Directional Wireless Router Antenna/HSA-2458TE9;
– Gain-dBi: 9;
– Frequency Range: 2.4 Ghz & 5 Ghz (Dual Band);
– VSWR: < 2.0;="">
– Polarization: Linear Vertical;
– Impedance: 50 ohm;
– Direction: Omni-directional;
– Connector: RP-SMA Male;
– Dimension: 39cm x 1,5cm;
– Net Weight: 50g;
– Operating/Storage temperature: -20°С ~+60°С/ -30°С ~+75°С;
– Operating Humidity: 0% to 85% (non-condensing);
– Cable length/type: 7 inch(17.8cm) / RG178 low loss coaxial.

PACKAGE INCLUDES: Kit of 2 Omni-Directional long range Wi-Fi 9dbi Dual Band Antenna 2.4Ghz/5Ghz and 2pcs of RF U.FL Mini PCI to RP-SMA Female Pigtail Antenna Wi-Fi RG178 Low Loss RG178 Cable. Kit for miniPCIe cards.

This is the Original Nagoya NA-701 Dual Band High Gain Antenna, Dual Band High Gain Antenna

The NA-701 is tuned to the amateur frequencies of 144/430MHz (* consider the NA-701C for higher VHF/UHF frequencies 155/455MHz)

This is the recommended UHF Antenna as it is dramatically more efficient then the NA-771 on UHF. It also performs extremely well for its length on VHF as well (better then a stock antenna)

Nagoya has taken another step to limit counterfeit listings. Handheld Radio Antennas arrive in a Green Poly Bag (with rounded corners), a bag printed barcode (might be covered by Amazon barcode), and the BTECH Logo Seal

Specifications
Frequency: 144/430MHz
Gain: 2dBi
Max power: 10Watts
VSWR : Less 1.5:1
Impedance: 50 OHM
Connector: SMA-F
Length: 8.5 inches

Package:
1x Nagoya NA-701 Booster Antenna
1x Flexible Washer
Compatible with:

BTECH:
GMRS-V1 (NA-701C Ideal for GMRS), MURS-V1 (NA-701C Ideal for MURS) – The NA-320A Antenna is recommended for the UV-5X3

BaoFeng:
BF-F8HP, UV-82HP, UV-82C, UV-82 Series, UV-5R (All models), and all others

And any other radio that uses the SMA-FEMALE Connection