Finding your suitable readers for hot starter for refrigerator compressor is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for hot starter for refrigerator compressor including detail information and customer reviews. Let’s find out which is your favorite one.
618 reviews analysed
1. RCO410 3-in-1 Hard Start Capacitor Kit for Freezer & Refrigerator Compressors by PartsBroz – Replaces Part Numbers TJ90RCO410, AP4503017, 600-410, ERP410, HS410, RC0410, RCO-410, RCO410
Feature
- ✅ PART NUMBER RCO410: It’s a high-quality exact replacement part for part numbers RCO410, HS410, TJ90RCO410, AP4503017, 600-410, and ERP410.
- ✅ FOR COMPRESSOR SIZES 1/4 to 1/3: Part RCO410 fits several different compressor types including RSIR, CSIR, PSC, and CSR compressors. Use it to repair residential and commercial fridges and freezers.
- ✅ EXTENDS LIFE OF YOUR COMPRESSOR: A hard start kit helps your fridge or freezer compressor last longer. It also allows the compressor to work more efficiently, which will help to lower your power bill.
- ✅ DIY-FRIENDLY, 3-in-1 DEVICE: It’s a combination overload, capacitator, and relay device. It replaces all three electrical components of a capillary fridge or freezer system at once to avoid damaging the compressor.
- ✅ HIGH-QUALITY DESIGN: This exact equivalent part is durably made and intelligently designed to work with nearly all refrigerator system makes and models. Plus, it’s pre-wired for easy installation.
Description
A hard start kit increases the efficiency of your refrigerator or freezer’s compressor. Not only does this extend the life of your compressor, but it also helps you save money on your power bill. For DIYers, a three-in-one, pre-wired start kit like this one is your best option. It replaces all three electrical components at once, so you don’t have to worry about accidentally damaging the compressor with mismatched parts. Use it with any 1/4 to 1/3 sized compressor.<>
Fits Several Compressor Types
Use this high-quality exact equivalent hard start kit with nearly any residential or commercial refrigerator system. Compatible compressor types include: RSIR, CSIR, PSC, and CSR.
Replaces Several Part Numbers
Know what part number you’re looking for? This hard start kit replaces part numbers RCO410, HS410, TJ90RCO410, AP4503017, 600-410, and ERP410.
Please reach out to us if you have a question about compatibility. Comment below in the customer questions and answer section, or send us a message on the PartsBroz storefront. We’re happy to help ensure you select the right part number.
2. refrigerator/freezer overload relay kit for 4387913 7020935 4387766 4387836
Feature
- refrigerator/freezer compressor overload relay kit is a suitable aftermarket replacement for part #’s 4387913 7020935 4387766 4387836.
- This kit has an overload rated for 1/4 hp and a 3 pronged relay rated up to 4.7 ohms.
- Can be used for Whirlpool, GE, Frigidaire, Maytag, Amana, Subzero etc
- 120V hot wire goes to overload, neutral wire goes to prong 2 on relay. Capacitor if present can connect to prongs 1 and 3 on relay.
Description
refrigerator/freezer compressor overload relay kit is a suitable aftermarket replacement for part #’s 4387913 7020935 4387766 4387836.
This kit has an overload rated for 1/4 hp and a 3 pronged relay rated up to 4.7 ohms.
Can be used for Whirlpool, GE, Frigidaire, Maytag, Amana, Subzero etc
120V hot wire goes to overload, neutral wire goes to prong 2 on relay. Capacitor if present can connect to prongs 1 and 3 on relay.
3. Raven RCO410 3 in 1 Compressor Hard Start Capacitor Kit for Refrigerators & Freezers 1/4-1/3 H.P. 115VAC
Feature
- ✅ CONTENTS: 1 Compressor hard start capacitor and 2 wire nuts
- ✅ COMPATIBILITY: Use it for compressor sizes 1/4 to 1/3. Part RCO-410 fits several different compressor types including RSIR, CSIR, PSC, and CSR compressors. Use it to repair residential and commercial fridges and freezers. Replaces parts number RCO410, HS410, TJ90RCO410, AP4503017, 600-410, and ERP410
- ✅ PERFORMANCE: It’s a combination overload, capacitator and relay device. It replaces all three electrical components of a capillary fridge or freezer system at once to avoid damaging the compressor
- ✅ HIGH-QUALITY DESIGN: This exact equivalent part is durably made and intelligently designed to work with nearly all refrigerator system makes and models. Plus, it’s pre-wired for easy installation
- ✅ 100% MONEYBACK GUARANTEE: We offer 90 days return and 365 days replace (at no charge) after the date of original purchase for risk-free purchase
Description
A hard start kit increases the efficiency of your refrigerator or freezer’s compressor. Not only does this extend the life of your compressor, but it also helps you save money on your power bill.
For DIYers, a three-in-one, pre-wired start kit like this one is your best option. It replaces all three electrical components at once, so you don’t have to worry about accidentally damaging the compressor with mismatched parts. Use it with any 1/4 to 1/3 sized compressor.
Fits Several Compressor Types
Use this high-quality exact equivalent hard start kit with nearly any residential or commercial refrigerator system. Compatible compressor types include: RSIR, CSIR, PSC, and CSR.
Installation Instructions
1. Disconnect power supply. 2. Remove old relay and overload.
3. Push terminal connected to white wire on RCO onto start terminal of compressor. 4. Push terminal connected to red wire on RCO onto run terminal of compressor.
5. Push terminal connected to black wore on RCO onto common terminal of compressor. 6. Connect one-line wire which was removed from old relay to one of the line wires of the RCO, using wire nut.
7. Connect other line wire which was removed from the old Overload to other line wire of the RCO, using wire nut.
4. refrigerator/freezer overload relay kit for 4387913 7020935 4387766 4387836
Feature
- refrigerator/freezer compressor overload relay kit is a suitable aftermarket replacement for part #’s 4387913 7020935 4387766 4387836.
- This kit has an overload rated for 1/4 hp and a 3 pronged relay rated up to 4.7 ohms.
- Can be used for Whirlpool, GE, Frigidaire, Maytag, Amana, Subzero etc
- 120V hot wire goes to overload, neutral wire goes to prong 2 on relay. Capacitor if present can connect to prongs 1 and 3 on relay.
Description
refrigerator/freezer compressor overload relay kit is a suitable aftermarket replacement for part #’s 4387913 7020935 4387766 4387836.
This kit has an overload rated for 1/4 hp and a 3 pronged relay rated up to 4.7 ohms.
Can be used for Whirlpool, GE, Frigidaire, Maytag, Amana, Subzero etc
120V hot wire goes to overload, neutral wire goes to prong 2 on relay. Capacitor if present can connect to prongs 1 and 3 on relay.
5. TOTOT 2pcs QP2-4.7 PTC Refrigerator Start Relay 1 Pin Coolers Compressor Starter QP2-4R7 4.7 ohm
Feature
- Type: 2pcs Refrigerator PTC Start Relay, Model: QP2-4R7, Pin: 1Pin, Resistance: 4.7 ohm
- Made of high quality material, stable characteristics, high reliability. Ideal spare parts for refrigerator to replace old one.
- Best solution for some common problems, such as compressor is not starting, burning hot and “click-clack” about Every 3-5 Minutes When Powered On.
- Suitable for various of mini-fridges, wine centers and beverage coolers and so on. Easy to install.
- Fit For: Vissani, Danby, Vinotemp, EdgeStar, Summit, Whirlpool, Frgidaire, Kenmore, Maytag, Haier, Igloo, Magic Chef.
Description
Specifications:
Type: Refrigerator PTC Start Relay
Model: QP2-4R7
Pin: 1 pin
Resistance: 4.7 ohm
Material: Metal, Plastic
Color: Black
Working Principle
When the motor starts up, it has to overcome its inertia and the reaction force of the load. Therefore, it needs large current and torque when the motor starts up. When turn to normal, in order to save energy, large torque and need a drop, add a set of auxiliary to motor coil, work only at boot time, normal after it is disconnected, the PTC thermistor series auxiliary coil at startup, starts the PTC thermistor into the high impedance state to cut off the secondary coil, just can achieve the effect.
Package Content: 2 x PTC Starter Relays
6. Supco RCO410 Start Kit
Description
Product Description
Are you looking to replace a hard start to a refrigerator? Look no further than the Refrigerator Hard Start from Exact Replacement Parts. This hard start is a replacement for all makes and models of refrigerators.
From the Manufacturer
This pre-wired start kit will replace all 3 electric components on capillary refrigeration systems.
7. YABER Car Jump Starter, 2500A Peak 23800mAh Car Battery Jump Starter(All Gas or 8.0L Diesel) Portable Wireless Charger with LED Flashlight, EC5 Cigarette Lighter, Safety Hammer, LCD Screen
Feature
- ????【10W WIRELESS CHARGER】10W wireless charger function and large 23800mAh battery capacity can provide sufficient power to quick charge your smartphones. Also, this jump starter is equipped with two USB Output including USB1 (QC3.0 5V 3A / 9V 2A / 12V 1.5A),USB2 (5V 2.4A) and 5V 2A Type C input for charging.
- ????【POWERFUL JUMP STARTER】The YABER YR800 jump starter can start 12V vehicles (all gasoline and 8L diesel) in seconds up to 30 times, it provides a peak current of 2500A. YABER car jump starter is suitable for cars, motorcycles, boat, yacht.
- ????【POWER 12V AUTO DEVICES】There is an EC-5 cigarette lighter adapter for this portable jump starter. It is convenient to power the other 12V automotive equipment such as air compressor, car vacuum cleaner and car refrigerator.
- ????【MULTI-FUNCTION】4 Lighting Modes – flashlight, strobe, SOS and Warning light. This car jump starter power pack can work as an torch, saftey hammer, compass in an emergency. Also, the digital LCD screen can exactly show the remaining power and the operating status of the jump starter.
- ????【WHAT YOU GET】1 x Car Jump Starter, 1 x Smart Jumper clamps, 1 x Type C Cable, 1 x User Manual, 1x EC5 Cigarette Lighter Adapter, 1 x Storage Case. The portable car jump starter’s built-in protection circuit works with intelligent alligator clamps features more than 8 advanced safety protections.
8. RLECS 2pcs 3 Pin Coolers Compressor Starter QP-02-4.7 PTC Refrigerator Start Relay 4.7 ohm
Feature
- Type: Refrigerator PTC Start Relay
- Model: QP-02-4.7
- Pin: 3Pin
- Resistance: 3-4.7 ohm
- Made of high quality material, stable characteristics and high reliability. Ideal spare parts for refrigerator to replace old one
- Prepared for some common problems, such as compressor is not starting, burning hot and “click-clack” about every 3-5 minutes when powered on
- Suitable for various of mini-fridges, wine centers and beverage coolers and so on. Easy to install
- Package includes: 2 x PTC Starter Relays
Description
Specifications:
Type: Refrigerator PTC Start Relay
Model: QP-02-4.7
Pin: 3 pin
Resistance: 3-4.7 ohm
Material: Metal, Plastic
Color: Black
Package includes: 2 x PTC Starter Relays
Working Principle:
When the motor starts up, it has to overcome its inertia and the reaction force of the load. Therefore, it needs large current and torque when the motor starts up. When turn to normal, in order to save energy, large torque and need a drop, add a set of auxiliary to motor coil, work only at boot time, normal after it is disconnected, the PTC thermistor series auxiliary coil at startup, starts the PTC thermistor into the high impedance state to cut off the secondary coil, just can achieve the effect.
9. Supco RCO810 3 n’ 1 START Hard Start Kit
Description
Product Description
This 3 in 1 start kit is for compressors with horse power of 1/12 through 1/5.
From the Manufacturer
This 3 in 1 start kit is for compressors with horse power of 1/12 through 1/5.
10. Supco URCO410-0 Pre-wired Capacitor
Description
Product Description
This pre-wired start kit includes a relay, capacitate, and overload device.
From the Manufacturer
This pre-wired start kit includes a relay, capacitate, and overload device.
Conclusion
By our suggestions above, we hope that you can found Hot Starter For Refrigerator Compressor for you.Please don’t forget to share your experience by comment in this post. Thank you!
