Nowadays, there are so many products of ge 15 ice maker plumbing in the market and you are wondering to choose a best one.You have searched for ge 15 ice maker plumbing in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ge 15 ice maker plumbing which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
745 reviews analysed
1. Certified Appliance Accessories Braided Stainless Steel Ice Maker Connector, 15ft
Feature
- Braided stainless Steel ice maker connector
- 1/4 inch fem. x 1/4 inch fcm
- Upc, NSF/ANSI 61 & case certified Certified Appliance Accessories recommends installation of this product be performed by a licensed professional
- 15Ft
- Braided stainless steel
- 1/4 -Inch Comp x 1/4-Inch Comp
- 5 year warranty- From the Manufacturer
Description
Product Description
Are you replacing a 5+ year-old ice maker connector hose or hooking up a new ice maker? This 15 ft. Braided Stainless Steel Ice Maker Connector from Certified Appliance Accessories is just what you need. It is corrosion-resistant inside and out plus bends freely for easier installation in cramped spaces.
From the Manufacturer
Ice Maker Connectors (15-Foot)
2. GE GXRTDR Exterior Refrigerator/Icemaker Filtration System, White
Feature
- Inline filtration: Filtered ice for your beverages
- Compatible with refrigerators without built-in filtration: Easily attaches directly to existing refrigerator/ice-maker water line in select GE side-by-side and top-freezer refrigerators
- NSF certified: Brings better tasting water and ice to your home by reducing chlorine taste and odor and sediment
- Six-month filter life: Filter should be replaced every six months for best filtration results
Description
Product Description
The GE Exterior Refrigerator/Icemaker Filtration System reduces contaminants such as sediment and chlorine. Installs directly to the water line of refrigerators without built-in filtration. Entire system is NSF/ANSI certified.
From the Manufacturer
The GXRTDR inline filter has 1/4-Inch quick connect fittings to install easily behind your refrigerator, with no special tools required. Simply insert your quarter inch water line into the ends of the GE GXRTDR filter.
3. Fluidmaster 12IM72 Ice Maker Connector, Braided Stainless Steel – 1/4 Compression Thread x 1/4 Compression Thread, 6 Ft. (72-Inch) Length
Feature
- 72” in length
- ¼ COMP x ¼ COMP Female Compression Thread Connection
- Lead Free
- Easy Install
- Braided stainless steel construction won’t kink or crease
- Heavy-duty nickel-plated brass hex nuts are easy to grip and provide durability
- Replaces old copper or vinyl connectors
- Meets all code requirements
Description
Product Description
This Fluidmaster Braided Stainless Steel 6-Foot (72 in) Length Ice Maker Supply Line connects your Icemaker to the wall water supply. Fluidmaster Icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts. A proven supply line that won’t crease or tangle even in the tightest of corners. Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. A 1/4-Inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Code approved with a 5 year warranty.
From the Manufacturer
Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.
4. Sharkbite 25032A Ice Maker Outlet Box, 1/2 inch x 1/4 inch Compression, Push-to-Connect Copper, PEX, CPVC, PE-RT Pipe
Feature
- INSTALLS IN SECONDS: Ice Maker Box requires no special tools, no soldering, no crimping, unions or glue. Just push to create a watertight seal to the SharkBite fitting
- COPPER, PEX, CPVC: SharkBite fittings fit copper tubing, CPVC, PEX or PE-RT pipe in any combination
- LEAD FREE COMPLIANT: DZR lead free brass SharkBite valves
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
Description
The SharkBite Ice Maker Outlet Box is integrated with SharkBite push-to-connect ends to allow for quick and easy installation of a water main supply and shutoff for refrigerator ice maker and water dispenser appliances using Copper, PEX, CPVC, or PE-RT water lines. This is lead-free compliant and is offered with or without integral water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing. The snap-on faceplate accommodates up to 3/4″ drywall. 1/2″ SB X 1/4″ Compression Can be used with copper, cpvc or pex lines Decease the time & effort needed to connect water distribution pipe, no glue, soldering or crimping needed Simply cut your pipe, deburr, mark the pipe approximately 1″ For proper insertion depth, install pipe to proper depth Use behind your refrigerator, ice maker, or water dispenser to provide a clean installation & allow for easy shut off Includes the ice maker outlet box Faceplate cover, 2 support brackets.
5. FlexCraft 26610-NL, Ice Maker Supply Line, Connects Ice Maker to Water Supply, Ice Maker Hose With 1/4 in Fittings On Both Ends, Braided Stainless Steel 10 Ft
Feature
- BURST PROOF: Flexcraft ice maker connector is made of super-high tensile strength braided stainless steel protects PVC inner tube, ensuring maximum pressure and performance.
- SPECIFICATIONS: 10 ft long with 1/4 in. x 1/4 in diameter, 125 PSI, Working Temperature 40 F-140 F
- UNIVERSAL FIT: pipe has 1/4 Brass chrome fitting on both ends and is compatible with most ice makers
- EASY INSTALLATION: prevents kinking or crimping for easy isntallation
- CERTIFICATION: UPC certified, Lead Free
Description
This is an Everflow Supplies lead free flexible ice maker supply line, made of stainless steel braided tube. In particular, it has a length of 120 inch and it has two 1/4 inch compression fittings on both ends. Furthermore, upc, nsf and csa approved the part for meeting the lead free nsf 61-g standards.
6. Eastman 48392 Flexible Stainless Steel Braided Ice Maker Connector with Brass Nuts, 1/4-Inch Comp X 1/4-Inch Comp, 25-Feet
Feature
- LENGTH: The line length of this ice maker connector is 25-feet
- CONNECTION: This connector has 1/4-inch Comp x 1/4-inch Comp connection
- MATERIAL: This ice maker connector hose is made of high-impact braided 304 stainless steel exterior with a PVC core, nylon reinforcement and a clear vinyl outer shell which provides strength
- DURABLE: The sturdy stainless steel supply line makes it durable preventing kinking and has nickel-plated brass nuts which ensure tight fitting
- EASY INSTALLATION: This flexible supply line is very easy to install
Description
Product Description
The Eastman 48392 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 25-feet long. It is an ideal ice maker connector for use, featuring a grade 304 stainless steel braided exterior, plc. core, multi-filament braided nylon reinforcement, and a clear vinyl outer shell. For secure fitting, it comes with nickel-plated brass nuts.
Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.
From the Manufacturer
Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.
7. iSpring ICEK Ultra Safe Fridge Water Line Connection and Ice Maker Installation Kit for Reverse Osmosis Systems & Water Filters
Feature
- Connects any water filtration system (including reverse osmosis systems) to the ice maker or water dispenser of your fridge
- Delivers crystal clear ice cubes and great tasting RO water to your fridge, superior to inline fridge filters
- Kit includes everything you need for the installation – 20 feet 1/4″ tubing, a 1/4″ x 1/4″ x 1/4″ “T” valve, an inline 1/4″ x 1/4″ shut off valve, and a compression fitting set. Tested by independent third-party to meet NSF/ANSI Standards
- Durable and easy to install – Push-in quick connect fittings offer easy DIY installation with no tools required
- Push-in quick connect fittings offer easy DIY installation with no tools required
Description
The iSpring fridge connection kit connects your reverse osmosis system or other water filters to your fridge. It can be used to supply your refrigerator’s ice maker or water dispenser, your coffee maker, etc. The kit comes with a 1/4″ x 1/4″ x 1/4″ “T” valve to branch off from the RO system, 20 feet of 1/4″ tubing, a 1/4″ x 1/4″ ball valve to shut off the flow when needed, and a compression connection set for connecting to the output location. The fridge connection kit will work with any RO system or filtration system that uses standard 1/4″ tubing. Why iSpring? Located in Alpharetta, Georgia for over a decade, iSpring Water Systems LLC is a family owned company specializing in reverse osmosis water filtration systems. Our products include residential and commercial reverse osmosis (RO) systems, whole house water systems, ultrafiltration systems, shower, faucet, and counter top filters, filter cartridges and housings, RO coolers, and kitchen faucets and fittings. Our aim is to make high quality drinking water accessible for all households. With affordable pricing, solid quality, prompt delivery, and top notch customer service, we hope to assist in bringing you great water for years to come.
8. Whirlpool 8212547RP 5-Feet Pex Ice Maker Hook-up Kit
Description
Product Description
This is a genuine replacement part.
From the Manufacturer
Refrigerator water supply kit includes everything needed for easy installation and fits most refrigerators. Refrigerator water supply kit provides water to ice makers, ice and water dispensers, freestanding ice makers, humidifiers, and evaporator coolers. Refrigerator water supply kit contains one 5-Feet pex tubing and fittings.
9. AQUACREST Replacement GXRTQR Refrigerator Water Filter, Compatible with GE GXRTQR GXRTQ System (Pack of 3)
Feature
- The advanced granular activated carbon can remove chlorine, bad taste, unpleasant odor and retain beneficial minerals in your tap water.
- Enjoy fresh water by replacing your water filter every 6 months or 2,000 gallons.
- Wonderful design to fit the original brand. We stand behind the quality of filtration and overall performance of our filters!
- Easy for installation and operation, no tools required.
- Fit GE GXRTQR
- Will fit GE GXRTQ filteration system. AQUACREST is an independent brand. This filter is not an original product.
Description
AQUACREST: Quality Water Quality Life
◆Great value!
◆Tasty water and ice cubes!
◆Hassle-free installation!
◆Worry-free use!
AQUACREST water filter is the right choice for you!!!
Premium Quality
AQUACREST water filter is designed to improve your life with clean, great water. Strict quality control guarantees uncompromising filtration performance. You can feel assured that you and your family are getting the most out of your water.
Perfect Fit
AQF-GXRTQR is an exact replacement for GE GXRTQR refrigerator water filter. Our professional R&D team focuses on delicate design and reasonable structure, which ensures precise and leak-free fit.
Filter Life
To maintain best performance, it is recommended you operate the filter within operating specifications and replace every 6 months or 2,000 gallons, whichever comes first and will vary with your water quality.
10. Frizzlife Under Sink Water Filter System-High Capacity Direct Connect Under Counter Drinking Water Filtration System-0.5 Micron Quick Change Removes 99.99% Lead, Chlorine, Bad Taste & Odor.
Feature
- 99.99% LEAD removal water filtration system
- Direct connect to Under Sink Water Filtration System
- ✔TWO-STAGE ADVANCED WATER PURIFIER WITH 0.5 MICRON: The Frizzlife MK99 Water Filtration System include a TWO-STAGE High precise compoud filter, which has a unique technology that removes over 99.99% of contaminants while leaving in all essential minerals. Eliminates LEAD, HEAVY METALS, CHLORINE, CHROMIUM 6, MERCURY, RUST, VOLATILE ORGANIC COMPOUNDS, CARCINOGENS, AND OTHER CONTAMINANTS, SUCH AS TURBIDITY, ORDORS AND BAD TASTES. Enjoy PURE AND HEALTHY WATER From the tap. NO more bottle water!
- ✔FITS BOTH 1/2″ AND 3/8″ COLD WATER LINE: Super EASY Installation. Come with 3/8″ DIRECT CONNECT hoses that fits standard 3/8″ feed water valves under US kitchen sinks. The Inline water filter system also come with a 3/8″ to 1/2″ converter fittings allow the system directly install to the existing both 1/2″ and 3/8″ cold water line and faucet under your sink. Took less than 3 minutes and NO PLUMBING REQUIRED! New installation video available.
- ✔BEST AUTO SHUT OFF DESIGN: Utilizing quick change twist-in installation design makes it take less than 3 minutes for you to install the system or doing a filter replacement. Provides quick twist connection for easy, tool-free, no mess filter replacement. The filter cap is designed with BUILT-IN shut off valve. You don’t even need to shut off the water supply whenever you work on the filter cartridge replacement.
- ✔HIGH FLOW RATE & MULTI-USAGE: Enjoy tap water as pure and healthy as spring fresh water. Tested Full Flow Rate ＞2.0GPM @40 psig. Good for cooking, washing fruits & veggies and cleaning dishes without watermarks.
- ✔MONEY SAVING & 100% SATISFACTION: The under counter water filter system contains a core filter cartridge inside the housing, you will only need to replace the core part of the filter cartridge instead of throwing away the whole plastic part, it will save you much money on replacing the cartridge and will do a lot of helps on the environmental protection. Each cartridge with high capacity can be used for 2 years or 1,600 gallon water, for better filtration, suggest to replace after 6-8 month.
Conclusion
By our suggestions above, we hope that you can found Ge 15 Ice Maker Plumbing for you.Please don’t forget to share your experience by comment in this post. Thank you!
