Nowadays, there are so many products of electrical parts 30a range current sensor module acs712 in the market and you are wondering to choose a best one.You have searched for electrical parts 30a range current sensor module acs712 in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings electrical parts 30a range current sensor module acs712 which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
500 reviews analysed
1. HiLetgo 2pcs ACS712 30A Current Sensor Module 30A Range ACS712 Module
HiLetgo ACS712 30A Current Sensor Module
1. The current sensor chips: ACS712ELC
2. Current Range: 30A
3. Pin 5V power supply, on-board power indicator;
4. The module can measure the positive and negative 30 amps, corresponding to the analog output 66mV / A;
5. No test current through the output voltage is VCC / 2;
6. PCB board size: 31 (mm) x13 (mm);
Note: ACS712 is based on the principle of the Hall test, please use this field to avoid impact
2* HiLetgo ACS712 30A Current Sensor Module
2. Lokar BL-1400U Backup Light/Neutral Safety Switch
Lokar Backup Light/Neutral Safety Switch offers the choice of back-up light switch or neutral safety switch kit. It features a single trigger for the back up light switch, or a double trigger for the neutral safety switch. The kit is not intended to function as both. All mounting hardware is included.
3. JANSANE SCT-013-030 30A Non-invasive AC Current Sensor Split-Core Current Transformer for Arduino Raspberry pi
- This SCT-013-030 ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation.
- This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi.
- Use this 30a current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for an AC load.
- Input Current: 30a AC
- Length of Leading Wire: 1m
- Two Form of Output: current output or voltage output (burden resistor needed to add)
- Cable Jack: 3.5mm (like a headphone jack).
- Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement and over-current protection.
Core Material: Ferrite
Input Current: 30a AC
Leading Wire in Length: 1.5m
Opening Size: 0.51 * 0.51inch / 13 x 13mm
Turns Ratio: 1: 1800
Resistance Grade: Grade B
Max Sampling Resistance: 10 Ω
Work Frequency: 50-1 KHz
Work Temperature: -25˚C ~ 70˚C
Reference project: Open Energy Monitor
Dielectric Strength: 6000V AC/1min
Two Form of Output: current output or voltage output (voltage output built-in the sampling resistor);
Mechanical strength: opening and closing times, no less than 1000 times (20 ℃) High Quality and Safe: Meet the requirement of flame-retardant characteristics (UL94-V0)
4. In ZIYUN (20A MAX) Split Core Current Transformer,AC Current Sensor,Output Class Analog Sensor,Working Principle Magnetic Sensor, useful for measuring whole building electricity consumption
- Applicable for current measurement, monitoring, and protection of the following devices:AC motor,Air compressor,Lighting equipment.
- Input Current: 0~20A AC ,Output Voltage: 0~1V ,Work Frequency: 50 ~ 1KHz,Secondary Coil: 1800 +- 2T,Accuracy: +-1%, Non-linearity: +- 3%.
- Build-in sampling resistance£¨RL): 93¦¸,Resistance Grade: Grade B,Work Temperature: -13F~ +158F (-25C ~ +70C).
- Safety indicators:Dielectric Strength(between shell and output) 1000V AC/1min 5mA,Fire resistance property: In accordance with UL94-VO.
- Leading Wire in Length 1m,Open Size: 13mm x 13mm.Model:SCT013-020
Split core current transformer are sensors that are used for measuring alternating current. They are particularly useful for measuring whole building electricity consumption (or generation for that matter).
This Split core current transformer is particularly suitable for DIY use it can be clipped straight on to either the live or neutral wire coming into the building without having to do any high voltage electrical work.
Applicable for current measurement, monitoring, and protection of the following devices:
Input Current: 0~20A AC
Output Voltage: 0~1V
Work Frequency: 50 ~ 1KHz
Secondary Coil: 1800 +- 2T
Non-linearity: +- 3%
Build-in sampling resistance£¨RL): 93¦¸
Resistance Grade: Grade B
Work Temperature: -13F~ +158F (-25C ~ +70C)
Dielectric Strength(between shell and output): 1000V AC/1min 5mA.
Fire resistance property: In accordance with UL94-VO.
Leading Wire in Length: 1m
Open Size: 13mm x 13mm
20A Split Core Current Transformer x1
5. EAI YDLIDAR X4 360 Degree 2D LIDAR Lidar Range 10M Finder Sensor Module with UART Communication Interface
- [High Accurracy] Scan Frequency 6-12Hz,Range Frequency：5000Hz,Range Distance：0.12-10m based on the Based on reflectivity of objects
- [360-degree two-dimensional rangefinder] The mechanical structure rotates 360 degrees to continuously output the angle information as well as the point cloud data of the scanning environment while ranging
- [Safety Standard] X4 is compliant with FDA Class 1 laser safety standard, which is safe to human eyes, thus guarantees the safety of children or pets
- [Widly Application] Robot navigation and obstacle avoidance, Robot ROS teaching and research , Regional security, Environmental scanning and 3D reconstruction Commercial robot /Robot vacuum cleaner
- [Wiki] You can find more docs by using the document code LD0001 via the link:https://www.youyeetoo.com/blog/ydlidar-x4-lidar-laser-radar-ld0001-21Any technical issues after purchase please contact with our tech-support team: [email protected] Or click “SmartFly info” and ask a question
To evaluate and develop the YDLIDAR under Windows, you need to install the serial port driver of the USB adapter board.
Note: The drive current of the USB interface of some development platforms or PCs is weak, and the Lidar needs to access the +5V auxiliary power supply, otherwise it will work abnormally.
Application field: Indoor
Light source: Infrared (785nm)
Accuracy: Full range＜2%
Range finder frequency:5000 times/S
Measuring distance:0.12m – 10m
Laser grade:class 1
UART:LVTTL Level standard
Support scan frequency adjustable:yes
Support low power:yesMechanical / electronic parameters
Electrical connection: 8 pin PH2.5 Connector
Power waste:1.5W (Start peak2.5W)
Shell color:black and blue
Working environment temperature:0~40°
Storage temperature range:0~70
1x YDLIDAR X4
1x USB Micro Cable
1x USB Adapter board
1x PH2.0-8P Pin Cable
Tech-Team: [email protected] Skype: monica_9122
Product Customization: [email protected]
6. 2 X 5A Range Electrical Parts Current Sensor Module ACS712
The current sensor chips: ACS712ELC-05B.
Pin 5V power supply, on-board power indicator.
The module can measure the positive and negative 5 amps, corresponding to the analog output 185mV / A.
Built in a potentiometer for sensitivity control.
Convenient and easy to install.
Package Content : 2 X 5A Current Sensor Module
7. Gikfun 20A Range Current Sensor ACS712 Module for Arduino (Pack of 2pcs) EK1181x2
8. SMAKN 12V 30A Female Car Cigar Cigarette Lighter Socket Plug Connector Adapter
100% brand new and high quality.
It has about 35cm long cable, Red color cable is Positive, Black color cable is Negative.
It can be used for 12V 30A power, Never have any overheat problems.
1 x Female Car Cigarette Lighter Socket Plug Connector
9. Gardner Bender GSW-21Electrical Motor Rated Push-Button Switch, SPST, Push ON-Push OFF, 10 A/125V AC, 6 inch Wire Terminal
Push button switch, single pole single throw, push on/push off, 6 inch stripped leads, recommended mounting hole fits 13/32 inch diameter, 10a/125V, 1/3 hp, Carded.
From the Manufacturer
The Gardner Bender GSW-21 Push Button Switch is perfect for use with lamps and home lighting. It has a maintained-contact push-on/push-off mechanism, a single pole with a single throw switch, and 6-inch leads. Gardner Bender has 50 years of experience making professional electrical tools and supplies of consistently superior quality, so you can count on high-performance products at a fair price.
By our suggestions above, we hope that you can found Electrical Parts 30A Range Current Sensor Module Acs712 for you.Please don’t forget to share your experience by comment in this post. Thank you!