Top 10 Belt For 2 Hp Electric Motor

0

Finding your suitable readers for belt for 2 hp electric motor is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for belt for 2 hp electric motor including detail information and customer reviews. Let’s find out which is your favorite one.

780 reviews analysed

1. Century formerly AO Smith GF2054 1/2 hp, 1725 RPM, 115 volts, 48/56 Frame, ODP, Sleeve Bearing Belt Drive Blower Motor

Century formerly AO Smith GF2054 1/2 hp, 1725 RPM, 115 volts, 48/56 Frame, ODP, Sleeve Bearing Belt Drive Blower Motor

Feature

2. Dial 2548 – Standard Motor Kit 1/2 HP 2-Speed 115V

Dial 2548 - Standard Motor Kit 1/2 HP 2-Speed 115V

Feature

Description

“DIAL” MOTOR KIT

  • 1/2hp, 2 speed
  • 1/2″ shaft diameter
  • A. O. Smith motor, 115V
  • Includes 36″ motor cord, adjustable zinc pulley & motor clamps
  • Motor windings are 100% copper
  • Built-in thermal overload protection – automatically shuts off if overheating occurs
  • Permanently lubricated
  • Boxed

3. A.O. Smith GF2034 Century Resilient Base Split Phase Electric Motor, 115 Vac, 6.8 A, 1/3 Hp, 1725 Rpm

A.O. Smith GF2034 Century Resilient Base Split Phase Electric Motor, 115 Vac, 6.8 A, 1/3 Hp, 1725 Rpm

Feature

4. 1/3hp 1725RPM 48/56Frame 115 volts Belt Drive Furnace Motor Century # GF2034

1/3hp 1725RPM 48/56Frame 115 volts Belt Drive Furnace Motor Century # GF2034

Feature

5. New WEG 1.5HP Electric Motor Fan Pump Compressor General purpose 56 frame 3430 rpm 1 phase 115/230VAC

New WEG 1.5HP Electric Motor Fan Pump Compressor General purpose 56 frame 3430 rpm 1 phase 115/230VAC

Feature

Description

1.5 hp – 56 Frame – 3430rpm – Single Phase – 115 / 208-230volt – 5/8″ shaft diameter – 1.874″ shaft length Please see attached Pics for motor dimensions and frame dimensions Technical Info: Horsepower: 1.5 Amperage: 8.40 fl amps at 230v Phase: One / Single Phase 2 pole Voltage: 115 / 208-230 RPM: 3430 Torque: 2.27lb.ft Base: Reinforced fixed base Frame: 56 Shaft Diameter: 5/8″ Keyed shaft Shaft Length: 1.874″ Rotation: Reversible CW or CCW Rotation Frequency: 60hz Service Factor: 1.00 @ 230v Enclosure: ODP Open Drip Proof (internally fan cooled) Construction: Rolled Steel Overload: Yes – Manual reset button Efficiency: (100%) 68.0 Weight: 40 lb

6. Leeson Farm Duty Electric Motor – 2 HP, 1,725 RPM, 230 Volts, Single Phase, Model Number M6K17FB4

Leeson Farm Duty Electric Motor - 2 HP, 1,725 RPM, 230 Volts, Single Phase, Model Number M6K17FB4

Feature

Description

‘Depending on the application, choose a single – or 3-phase AC farm duty electric motor with different HP, voltage and RPM range. Here is some additional information about Leeson High Torque Farm Duty Motor. Hp: 2, Voltage: 230, Phase: 1.’

7. Hallmark Industries MA0520F AC Motor, 2 hp, 3450 RPM, 3PH/60 hz, 208-230/460V AC, 56C/TEFC, with Foot, SF 1.15, Insul F, Inverter Duty, Steel (Pack of 1)

Hallmark Industries MA0520F AC Motor, 2 hp, 3450 RPM, 3PH/60 hz, 208-230/460V AC, 56C/TEFC, with Foot, SF 1.15, Insul F, Inverter Duty, Steel (Pack of 1)

Feature

8. Dayton 3K771 Belt Drive Motor, Split-Phase, 1725 Nameplate RPM, 115V, Frame 48, 1/4 hp

Dayton 3K771 Belt Drive Motor, Split-Phase, 1725 Nameplate RPM, 115V, Frame 48, 1/4 hp

Feature

9. Hallmark Industries MA0520A AC Motor, 2 hp, 1725 RPM, 1PH/60 Hz, 115/208-230 VAC, 56C/TEFC, Cap Start and Run with Foot, SF 1.15, Class F Insulation (Pack of 1)

Hallmark Industries MA0520A AC Motor, 2 hp, 1725 RPM, 1PH/60 Hz, 115/208-230 VAC, 56C/TEFC, Cap Start and Run with Foot, SF 1.15, Class F Insulation (Pack of 1)

Feature

10. A.O. Smith/Century DL1056 1/2 HP, 1075 RPM, 3 Speed, 115 Volts6.5 Amps, 48 Frame, Sleeve Bearing Direct Drive Blower Motor

A.O. Smith/Century DL1056 1/2 HP, 1075 RPM, 3 Speed, 115 Volts6.5 Amps, 48 Frame, Sleeve Bearing Direct Drive Blower Motor

Feature

Description

Direct drive fan & blower motor, reversible rotation.

Conclusion

By our suggestions above, we hope that you can found Belt For 2 Hp Electric Motor for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general