The Best 14 Hp Motor 110V
Finding your suitable readers for 1/4 hp motor 110v is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 1/4 hp motor 110v including detail information and customer reviews. Let’s find out which is your favorite one.
655 reviews analysed
1. A.O. Smith GF2024 Century Resilient Base Split Phase Electric Motor, 115 Vac, 5.4 A, 1/4 Hp, 1725 Rpm
Century Electric Motor, Resilient Base, Split Phase, Century, 115 VAC, 5.4 A, 60 Hz, 1/4 hp Power, Number of Phase: 1, 1725 rpm, 1/2 in Shaft Diameter, 1-1/2 in Shaft Length, Service Factor: 1.35, CW/CCW Rotation Type, Sleeve Bearing, Cradle Mounting, 1-3/8 in Mounting Hole Center, 54 % Efficiency, 40 deg C Ambient, Class B Insulation, Open Drip proof. Split phase motor, 5.4 amps, 60 hertz, auto protector, Sleeve Bearing, 1/2-Inch x 1-1/2-Inch shaft.
2. A.O. Smith DL1026 1/4 HP, 1075 RPM, 3 Speed, 115 Volts3.5 Amps, 48 Frame, Sleeve Bearing Direct Drive Blower Motor
Direct drive fan & blower motor, reversible rotation.
3. 1/4hp 1725RPM 48/56Frame 115 volts Belt Drive Furnace Motor Century # GF2024
Century Belt Drive Fan Motor 1/4 HP
4. 1/3hp 1725RPM 48/56Frame 115 volts Belt Drive Furnace Motor Century # GF2034
5. A1583, 1/4HP Furnace Blower Motor,115V,1075RPM, 4.2AMP
- 1/4HP Direct Drive Furnace Blower Motor, 115V, 1075RPM, 4.2AMP, 3-Speed
- Capacitor (required but not included): 5MFD/370V
- Replaces: Century DL1026
- Emerson 1863
- Grainger 4M096
- MARS 10583
- Fasco D721
- Geteq 3583
- Marathon X000
- Packard 43583
- Rheem W51-14BAA3-01
- Carrier P257-8583
- York S1-FHM3583
- Sleeve bearing, all angle
- RHEEM mounting holes
- 3 Speeds
- 1/2inch extended thru bolts
- 2-1/4inch resilient rings
- Class B insulation
- Single phase, 60 Hz
- Thermal overload protected
- Reversible rotation
- Fan duty, continuous air over
- Open construction
- 36” lead length
- Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find them on millions of HVAC units including Carrier, Goodman, Trane and other brands
- If you are a distributor, please continue your normal channel to source Broad-Ocean motors. Thank you. This retail venue is for contractors, repair technicians, and do-it-yourselfers, who otherwise may not have been adequately served with Broad-Ocean motors
6. MARS – Motors & Armatures 10728 1/4hp 1075rpm, 1 Speed 1.8 Amp Outdoor Condenser Fan Motor
1 speed motor; 1.8 amp; use to replace motor for other popular models; 16.7 pounds; 15 inches in length.
7. Dayton 3K771 Belt Drive Motor, Split-Phase, 1725 Nameplate RPM, 115V, Frame 48, 1/4 hp
8. Century GF2024 1/4 For hp 1725 RPM 48 Frame 115V Belt Drive Furnace Motor
Belt Drive Motor, Motor Application HVAC/R, Motor Sub Application Belt Dr Fan/Blower, Motor Type Split-Phase, HP 1/4, Nameplate RPM 1725, Voltage 115, Frame 48, Enclosure Open Dripproof, Mounting Cradle, Hz 60, Full Load Amps 5.4, Thermal Protection Auto, Insulation Class B, Service Factor 1.35, Bearings Sleeve, Max. Ambient Temp. 40 Degrees C, Rotation CW/CCW, Shaft Dia. 1/2″, Shaft Length 1-1/2″, Length Less Shaft 7-7/16″, Overall Length 8-15/16″, Body Dia. 5-5/8″, Resilient Ring Dia. 2-1/2″, Ring to Ring Center 7-3/16″, Nominal Efficiency 54.0%, Duty Continuous, RPM Range 1701-1800, Phase 1, Standards CSA Certified, Includes 5/8″ dia. Shaft BushingWARNING: California ResidentsThis product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
9. Century formerly AO Smith GF2054 1/2 hp, 1725 RPM, 115 volts, 48/56 Frame, ODP, Sleeve Bearing Belt Drive Blower Motor
10. Fasco D7909 5.6-Inch Condenser Fan Motor, 1/4 HP, 208-230 Volts, 1075 RPM, 1 Speed, 1.8 Amps, Totally Enclosed, Reversible Rotation, Ball Bearing
Motor Type: Permanent Split Capacitor RPM: 1075 HP: 1/4 Volts: 208-230 Amps: 1.8 Hz: 60 Phase: Single Phase Thermal Protection: Automatic Speeds: 1 Rotation: Reversible Bearings: Ball Enclosure Type: Totally Enclosed (TE) Frame Size: 5.6″ Frame Motor Diameter (In.): 5.6 Motor Length (In.): 4 Shaft (In.): 1/2 X 6 1/2 Bolt Circle (In.): 5-6/32 (5.2)
From the Manufacturer
PSC motor, 4 drilled and tapped holes in the shell, all angle mount bearings, 60 Degree ambient temperature rating, 1/2-Inch x 6-1/2-Inch shaft, 5mfd/370V Capacitor Needed – Not Included
By our suggestions above, we hope that you can found 14 Hp Motor 110V for you.Please don’t forget to share your experience by comment in this post. Thank you!